1

Artemis Does Require Your Secure Boot Disabled To Properly Work.
A good way to know it is disabled is by opening the command line “cmd” by using the windows searcher and opening it as administrator. Once opened write the following lines.

Bcdedit -Set TESTSIGNING OFF

Once opened write : bcdedit -set TESTSIGNING OFF. In case you do receive the message: “The operation completed successfully”, it means your secure boot is already disabled, on the other hand in case you do receive a message that it is protected by the secure boot protocol, first you will have to disable the secure boot it in your BIOS. –> GUIDE

2

The first thing we got to do is to login through our Blizzard account and have a registered copy of Overwatch. In case you don’t have one account, create it.

3

Open Artemis Launcher as an administrator

4

The first time you open the Loader you will have to register an account. Click on Create new account for Maveable Network.


Fill the form that appears from a new window and make sure to keep your credentials saved as this process can only be done once per device. The account will be bound to the machine and only 3 HWID resets are allowed per account. Also, you cannot create a new account from the same device.
Keep that in mind and operate wisely on this step. Once it’s done click on Register.

5

Log in with your recently created credentials.The main loader should then appear displaying your username, e-mail as well as the activation tab. Click on it. First part:

*In my case it has been delivered like this:

6

A confirmation window should appear, from here we can turn back to the main login and use our recently created credentials but before Confirm your registration. You receive an email to the registered account.

After clicking the Activation tab look on the left side and click the Overwatch game. Paste the serial key obtained from selly inside the empty case and then press “Check the License information”. This feature will display the remaining time and key type you’re using. Finally, click on Activate to start using that key code. Second Part:

7

*Make sure to open the game once this label is visible to you!

*An unique generated build for you will be created. This unique system will prevent any type of cheat related bans.

The expiration time should be displayed. At this point, the LOAD tab should be enabled. Press the button LOAD located down below and wait for the next label to appear.
Note: In case you suffer from FPS drop while playing, do activate the Enable Vsync option to match the cheat with your monitor refreshing rate.

8

Make sure that your game is running in borderless mode or window mode by using the game options. For this example, I have set my game in borderless mode and 1920×1080 resolution.


Open the Blizzard Agent, Select Overwatch and the region you are going to be using the cheat and click on Play.

9

The cheat will ask you to select the desired Language (English, Chinese or Korean) and once is chosen, the menu will automatically be loaded on the right side of the screen. To operate, select an Interface key, in my case I have set it to HOME (To open close the menu).The Entity toogle set to F12 (switch between enemies and friendly targets) END button to fully close the menu in case you wanna stop the cheat working (You will have to load the cheat again). Some other keys I have put are ESP- F1 and Aimbot to F2. Menu Loaded ingame:





Example of Game Languages:

10

In order to continue with the injection once you have opened the game, press 2 times the left mouse click in order to inject the cheat into Overwatch, like shown

9

I leave here some presets I use:
Download Presets

Triggerbot:
-The triggerbot works way different than the normal aimbot. In order to enable it, first make sure you have selected an activator key in “Scan Pattern key”. Basically, to activate it, zoom in with your sniper rifle while using Widowmaker. At this point use the scan activator key you have selected only once with the scope open.You will hear a Bip sound to confirm the operation. The next shoots will not require the activator, and upon using the scope, the shoots will be fired according to the delay time you have input.

Here’s one legit example with speed focused mode.

Menu Settings:
In order to operate with the cheat, there are various settings you can operate with. I leave you here an explanation for each parameter found. Keep in mind that each Artemis version may enable/disable any of these options guide. Use this as reference only.
Visual settings: Parameters associated with ESP in general.

Aimbot settings: Parameters associated with Aimbot, user control, aim control and speed.

Triggerbot for Widowmaker: Parameters associated with Widowmaker hero. Make sure you read also the Triggerbot mini-guide to understand the functionality.

Misc options, color settings: This section included the palettes to adjust the colors for the cheat ESP

EXTRAS GUIDE

FLICK GUIDE






Troubleshoot:

Most of the common errors found in Artemis got a simple fix. Here I leave a list of the most common found and how to get them solved.
[!] For Error Code 0:
1) Uninstall BitDefender (If Available)
2) Reboot Your PC
3) Disable Secure Boot

[!] For Error Code 4:
1) Reboot Your PC
2) Check Your Internet Connection
3) Wait Few Minutes and Try Again

[!] For No Error Code (Tmp error or not working ESP or Aimbot):
1) Disable Secure Boot
2) Reboot Your PC
3) Disable Anti-Virus or Firewall
4) Use VPN

[!] For Driver not Loading ingame.

1)Go to %AppData%
2)Find the random file names
3)Delete all folders with random names
4)Re-run the cheat.

[!] For Untrusted machine error.

1) Close all application
2) Go to %AppData%
3) If there is any folder named “DnSpy”, remove it
4) Reboot the PC (Clean Reboot)
5) Check the running application (no debuggers or traffic monitors such as httpdebug, fiddler and wireshark)
6) If any is running, close it by clicking End Task
7) Run the loader again
8 )If that does not work, put the loader into a USB